Recent questions and answers in Others

A $15 \mathrm{kVA}, 1100 \mathrm{~V} / 220 \mathrm{~V}$, single-phase two-winding transformer is configured as a $1.32 \mathrm{kV} / 1.1 \mathrm{kV}$ autotransformer.What...

A $3$-phase, $400 \mathrm{~V}, 4$ pole, $50 \: \mathrm{Hz}$ star connected induction motor has the following parameters referred to the stator:$$R_{r}^{\prime}=1 \Omega, ...

Neglecting the delays due to the logic gates in the circuit shown in figure, the decimal equivalent of the binary sequence $\text{[ABCD]}$ of initial logic states, which ...

The type of single-phase induction motor, expected to have the maximum power factor during steady state running condition, issplit phase (resistance start).shaded pole.ca...

The maximum clock frequency in $\text{MHz}$ of a $4$ – stage ripple counter, utilizing flip-flops, with each flip-flop having a propagation delay of $20\:ns$, is ________...

A $4$-pole induction motor with inertia of $0.1\; kg-m^{2}$ drives a constant load torque of $2\; Nm$. The speed of the motor is increased linearly from $1000$ $\text{rpm...

A $16$-bit synchronous binary up-counter is clocked with a frequency $f_{\text{CLK}}$.The two most significant bits are $\text{OR-ed}$ together to form an output $Y$. Mea...

Suppose the probability that a coin toss shows "head" is $p$, where $0<p<1$. The coin is tossed repeatedly until the first "head" appears. The expected number of tosses r...

An $8$-pole, $50 \:Hz$, three-phase, slip-ring induction motor has an effective rotor resistance of $0.08\:\Omega$ per phase. Its speed at maximum torque is $650 \text{ R...

A three-phase, $\text{50 Hz}$, $4$-pole induction motor runs at no-load with a slip of $1\%$. With full load, the slip increases to $5 \%$. The $\%$ speed regulation of t...

A $250 V$ dc shunt motor has an armature resistance of $0.2\:\Omega$ and a field resistance of $100\:\Omega$. When the motor is operated on no-load at rated voltage, it d...

A cylindrical rotor synchronous generator with constant real power output and constant terminal voltage is suppling $100 \: A$ current to a $0.9$ lagging power factor loa...

A non-ideal $\text{Si}$-based $\text{pn}$ junction diode is tested by sweeping the bias applied across its terminals from $-5\:V$ to $5\:V$. The effective thermal voltage...

The mean-square of a zero-mean random process is $\frac{kT}{c},$ where $k$ is Boltzmann’s constant, $T$ is the absolute temperature, and $C$ is a capacitance. The standar...

The probability of a resistor being deflective is $0.02$. There are $50$ such resistors in a circuit. The probability of two or more defective resistors in the circuit (r...

A single-phase transformer of rating $25$ kVA, supplies a $12$ kW load at power factor of $0.6$ lagging. The additional load at unity power factor in kW (round off to two...

Consider the given circuit. In this circuit, the race arounddoes not occuroccurs when $\text{CLK}=0$occurs when $\text{CLK}=1$ and $A=B=1$occurs when $\text{CLK}=1$ and $...

The output $Y$ of a $2$-bit comparator is logic $1$ whenever the $2$-bit input A is greater than the $2$-bit input B. The number of combinations of which the output is lo...

A person decides to toss a fair coin repeatedly until he gets a head. He will make at most $3$ tosses. Let the random variable $Y$ denote the number of heads. The value o...

A $375$W, $230$V, $50$Hz, capacitor start single-phase induction motor has the following constants for the main and auxiliary windings (at starting): $Z_{m}=(12.50+j15.75...

A $4$ pole induction machine is working as an induction generator. The generator supply frequency is $60$Hz. The rotor current frequency is $5$Hz. The mechanical speed of...

Two semi-infinite dielectric regions are separated by a plane boundary at $y = 0$. The dielectric constants of region $1 (y < 0)$ and region $2 (y 0)$ are $2$ and $5$, r...

A single-phase thyristor-bridge rectifier is fed from a $230 V, 50 Hz$, single-phase $AC$ mains. If it is delivering a constant $DC$ current of $10 A$, at firing angle of...

A temperature in the range of $−40 ^\circ C$ to $55^\circ C$ is to be measured with a resolution of $0.1^\circ C$. The minimum number of $ADC$ bits required to get a matc...