GATE Electrical 2013 | Question: 26

Question

A strain gauge forms one arm of the bridge shown in the figure below and has a nominal resistance without any load as $R_s = 300$ . Other bridge resistances are $R_1 = R_2 = R_3 = 300$ . The maximum permissible current through the strain gauge is $20\:mA$. During certain measurement when the bridge is excited by maximum permissible voltage and the strain gauge resistance is increased by $1\%$ over the nominal value, the output voltage $V_0$ in $mV$ is

• A. $56.02$
• B. $40.83$
• C. $29.85$
• D. $10.02$

Answer 1

Voltage, Vin = (300+300)*20m

                      = 12v

Now, V _{0 =  6-((300/603)*12)}

                = 0.03v.   I.e., 30mV