Register
Filter

Recent questions in Others

0 votes
0 answers
321
GATE Electrical 2012 | Question: 48
In the $3$-phase inverter circuit shown, the load is balanced and the gating scheme is $180^{\circ}$-conduction mode. All the switching devices are ideal. The rms value of load phase voltage is $106.1$ V $141.4$ V $212.2$ V $282.8$ V
In the $3$-phase inverter circuit shown, the load is balanced and the gating scheme is $180^{\circ}$-conduction mode. All the switching devices are ideal.The rms value of...
0 votes
0 answers
322
GATE Electrical 2012 | Question: 49
In the $3$-phase inverter circuit shown, the load is balanced and the gating scheme is $180^{\circ}$-conduction mode. All the switching devices are ideal. If the dc bus voltage $V_d=300$ V, the power consumed by $3$-phase load is $1.5$ kW $2.0$ kW $2.5$ kW $3.0$ kW
In the $3$-phase inverter circuit shown, the load is balanced and the gating scheme is $180^{\circ}$-conduction mode. All the switching devices are ideal.If the dc bus vo...
0 votes
0 answers
324
GATE Electrical 2012 | Question: 39
Consider the differential equation $\dfrac{d^2y(t)}{dt^2} + 2 \dfrac{dy(t)}{dt} + y(t)=\delta (t)$ with $y(t) \bigg \vert_{t=0^-}= -2$ and $\dfrac{dy}{dt} \bigg \vert _{t=0^-} =0$. The numerical value of $\dfrac{dy}{dt} \bigg \vert _{t=0^+}$ is $-2$ $-1$ $0$ $1$
Consider the differential equation $\dfrac{d^2y(t)}{dt^2} + 2 \dfrac{dy(t)}{dt} + y(t)=\delta (t)$ with $y(t) \bigg \vert_{t=0^-}= -2$ and $\dfrac{dy}{dt} \bigg \vert _{t...
0 votes
0 answers
325
GATE Electrical 2012 | Question: 40
Assuming both the voltages sources are in phase, the value of R for which maximum power is transferred from circuit A to circuit B is $0.8 \: \Omega$ $1.4 \: \Omega$ $2 \: \Omega$ $2.8 \: \Omega$
Assuming both the voltages sources are in phase, the value of R for which maximum power is transferred from circuit A to circuit B is$0.8 \: \Omega$$1.4 \: \Omega$$2 \: \...
0 votes
0 answers
326
GATE Electrical 2012 | Question: 29
The voltage gain $A_V$ of the circuit shown below is $\mid A_V \mid \approx 200$ $\mid A_V \mid \approx 100$ $\mid A_V \mid \approx 20$ $\mid A_V \mid \approx 10$
The voltage gain $A_V$ of the circuit shown below is$\mid A_V \mid \approx 200$$\mid A_V \mid \approx 100$$\mid A_V \mid \approx 20$$\mid A_V \mid \approx 10$
0 votes
0 answers
327
GATE Electrical 2012 | Question: 30
The state transition diagram for the logic circuit shown is
The state transition diagram for the logic circuit shown is
0 votes
0 answers
328
GATE Electrical 2012 | Question: 31
Let $y[n]$ denote the convolution of $h[n]$ and $g[n]$, where $h[n]=(1/2)^n u[n]$ and $g[n]$ is a casual sequence. If $y[0]=1$ and $y[1]=1/2$, then $g[1]$ equals $0$ $1/2$ $1$ $3.2$
Let $y[n]$ denote the convolution of $h[n]$ and $g[n]$, where $h[n]=(1/2)^n u[n]$ and $g[n]$ is a casual sequence. If $y[0]=1$ and $y =1/2$, then $g $ equals$0$$1/2$$1$$3...
0 votes
0 answers
330
GATE Electrical 2012 | Question: 33
For the system shown below, $S_{D1}$ and $S_{D2}$ are complex power demands at bus $1$ and bus $2$ respectively. If $\mid V_2 \mid =1$ pu, the VAR rating of the capacitor $(Q_{G2})$ connected at bus $2$ is $0.2$ pu $0.268$ pu $0.312$ pu $0.4$ pu
For the system shown below, $S_{D1}$ and $S_{D2}$ are complex power demands at bus $1$ and bus $2$ respectively. If $\mid V_2 \mid =1$ pu, the VAR rating of the capacitor...
0 votes
0 answers
332
GATE Electrical 2012 | Question: 35
In the circuit shown, an ideal switch $S$ is operated at $100$ kHz with a duty ratio of $50 \%$. Given that $\Delta i_c$ is $1.6$ A peak-to-peak and $I_0$ is $5$ A dc, the peak current in $S$ is $6.6$ A $5.0$ A $5.8$ A $4.2$ A
In the circuit shown, an ideal switch $S$ is operated at $100$ kHz with a duty ratio of $50 \%$. Given that $\Delta i_c$ is $1.6$ A peak-to-peak and $I_0$ is $5$ A dc, th...
0 votes
0 answers
333
GATE Electrical 2012 | Question: 22
The sequence components of the fault current are as follows: $I_{\text{positive}} = j1.5$ pu, $I_{\text{negative}} =- j0.5$ pu, $I_{\text{zero}} = – j1$ pu. The type of fault in the system is LG LL LLG LLLG
The sequence components of the fault current are as follows: $I_{\text{positive}} = j1.5$ pu, $I_{\text{negative}} =- j0.5$ pu, $I_{\text{zero}} = – j1$ pu. The type of...
0 votes
0 answers
334
GATE Electrical 2012 | Question: 23
A half-controlled single-phase bridge rectifier is supplying an R-L load. It is operated at a firing angle $\alpha$ and the load current is continuous. The fraction of cycle that the freewheeling diode conduct is $1/2$ $\big( 1- \alpha/ \pi \big)$ $\alpha / 2 \pi $ $\alpha/ \pi$
A half-controlled single-phase bridge rectifier is supplying an R-L load. It is operated at a firing angle $\alpha$ and the load current is continuous. The fraction of cy...
0 votes
0 answers
335
GATE Electrical 2012 | Question: 24
The typical ratio of latching current to holding current in a $20$ A thyristor is $5.0$ $2.0$ $1.0$ $0.5$
The typical ratio of latching current to holding current in a $20$ A thyristor is$5.0$$2.0$$1.0$$0.5$
0 votes
0 answers
337
GATE Electrical 2012 | Question: 28
If $V_A – V_B =6$ V, then $V_C – V_D $ is $-5$ V $2$ V $3$ V $6$ V
If $V_A – V_B =6$ V, then $V_C – V_D $ is$-5$ V$2$ V$3$ V$6$ V
0 votes
0 answers
338
GATE Electrical 2012 | Question: 16
The average power delivered to an impedance $(4-j3) \Omega$ by a current $5 \cos (100 \pi \:t +100)$A is $44.2$ W $50$ W $62.5$ W $125$ W
The average power delivered to an impedance $(4-j3) \Omega$ by a current $5 \cos (100 \pi \:t +100)$A is$44.2$ W$50$ W$62.5$ W$125$ W
0 votes
0 answers
339
GATE Electrical 2012 | Question: 17
In the following figure, $C_1$ and $C_2$ are ideal capacitors. $C_1$ has been charged to $12$ V before the ideal switch $S$ is closed at $t=0$. The current $i(t)$ for all $t$ is zero a step function an exponentially decaying function an impulse function
In the following figure, $C_1$ and $C_2$ are ideal capacitors. $C_1$ has been charged to $12$ V before the ideal switch $S$ is closed at $t=0$. The current $i(t)$ for all...
0 votes
0 answers
340
GATE Electrical 2012 | Question: 18
The $i-v$ characteristics of the diode in the circuit given below are $i= \begin{cases} \dfrac{v-0.7}{500}A, & v \geq 0.7 \: V \\ 0 A, & v <0.7 \: V \end{cases}$ The current in the circuit is $10 \: mA$ $9.3\: mA$ $6.67\: mA$ $6.2\: mA$
The $i-v$ characteristics of the diode in the circuit given below are $$i= \begin{cases} \dfrac{v-0.7}{500}A, & v \geq 0.7 \: V \\ 0 A, & v <0.7 \: V \end{cases}$$ The cu...
0 votes
0 answers
341
GATE Electrical 2012 | Question: 19
The output $Y$ of a $2$-bit comparator is logic $1$ whenever the $2$-bit input A is greater than the $2$-bit input B. The number of combinations of which the output is logic $1$, is $4$ $6$ $8$ $10$
The output $Y$ of a $2$-bit comparator is logic $1$ whenever the $2$-bit input A is greater than the $2$-bit input B. The number of combinations of which the output is lo...
0 votes
0 answers
342
GATE Electrical 2012 | Question: 20
Consider the given circuit. In this circuit, the race around does not occur occurs when $\text{CLK}=0$ occurs when $\text{CLK}=1$ and $A=B=1$ occurs when $\text{CLK}=1$ and $A=B=0$
Consider the given circuit. In this circuit, the race arounddoes not occuroccurs when $\text{CLK}=0$occurs when $\text{CLK}=1$ and $A=B=1$occurs when $\text{CLK}=1$ and $...
0 votes
0 answers
344
GATE Electrical 2012 | Question: 8
If $x[n]=(1/3)^{\mid n \mid} – (1/2)^n \: u[n]$, then the region of convergence (ROC) of its $Z$-transform in the $Z$-plane will be $\dfrac{1}{3} < \mid z \mid < 3 \\$ $\dfrac{1}{3} < \mid z \mid < \dfrac{1}{2} \\$ $\dfrac{1}{2} < \mid z \mid < 3 \\$ $\dfrac{1}{3} < \mid z \mid $
If $x[n]=(1/3)^{\mid n \mid} – (1/2)^n \: u[n]$, then the region of convergence (ROC) of its $Z$-transform in the $Z$-plane will be$\dfrac{1}{3} < \mid z \mid < 3 \\$$\...
0 votes
0 answers
346
GATE Electrical 2012 | Question: 10
The slip of an induction motor normally does not depend on rotor speed synchronous speed shaft torque core-loss component
The slip of an induction motor normally does not depend onrotor speedsynchronous speedshaft torquecore-loss component
0 votes
0 answers
347
GATE Electrical 2012 | Question: 11
A two-phase load draws the following phase currens: $i_1(t)=I_m \sin(\omega t – \phi_1), i_2(t) = I_m \cos(\omega t – \phi_2)$. These currents are balanced if $\phi_1$ is equal to $- \phi_2$ $\phi_2$ $\pi/2 - \phi_2$ $\pi/2 + \phi_2$
A two-phase load draws the following phase currens: $i_1(t)=I_m \sin(\omega t – \phi_1), i_2(t) = I_m \cos(\omega t – \phi_2)$. These currents are balanced if $\phi_1...
0 votes
0 answers
348
GATE Electrical 2012 | Question: 12
A periodic voltage waveform observed on an oscilloscope across a load is shown. A permane magnet moving coil (PMMC) meter connected across the same load reads $4$V $5$ V $8$ V $10$ V
A periodic voltage waveform observed on an oscilloscope across a load is shown. A permane magnet moving coil (PMMC) meter connected across the same load reads$4$V$5$ V$8$...
0 votes
0 answers
349
GATE Electrical 2012 | Question: 13
The bridge method commonly used for finding mutual inductance is Heaviside Campbell bridge Schering bridge De Sauty bridge Wien bridge
The bridge method commonly used for finding mutual inductance isHeaviside Campbell bridgeSchering bridgeDe Sauty bridgeWien bridge
0 votes
0 answers
350
GATE Electrical 2012 | Question: 4
In the circuit shown below, the current through the inductor is $\dfrac{2}{1+j} A\\ $ $\dfrac{-1}{1+j} A\\$ $\dfrac{1}{1+j} A \\$ $0 A$
In the circuit shown below, the current through the inductor is$\dfrac{2}{1+j} A\\ $$\dfrac{-1}{1+j} A\\$$\dfrac{1}{1+j} A \\$$0 A$
0 votes
0 answers
351
GATE Electrical 2012 | Question: 5
The impedance looking into nodes $1$ and $2$ in the given circuit is $50 \: \Omega$ $100 \: \Omega$ $5 \: \Omega$ $10.1 \: \Omega$
The impedance looking into nodes $1$ and $2$ in the given circuit is$50 \: \Omega$$100 \: \Omega$$5 \: \Omega$$10.1 \: \Omega$
0 votes
0 answers
352
GATE Electrical 2012 | Question: 6
A system with transfer function $G(s) =\frac{(s^2+9)(s+2)}{(s+1)(s+3)(s+4)}$ is excited by $\sin (\omega t)$. The steady-state output of the system is zero at $\omega = 1 \text{ rad/s}$ $\omega = 2\text{ rad/s}$ $\omega = 3 \text{ rad/s}$ $\omega = 4 \text{ rad/s}$
A system with transfer function $$G(s) =\frac{(s^2+9)(s+2)}{(s+1)(s+3)(s+4)}$$ is excited by $\sin (\omega t)$. The steady-state output of the system is zero at$\omega = ...
0 votes
0 answers
355
GATE Electrical 2018 | Question: 46
The unit step response $y(t)$ of a unity feedback system with open loop transfer function $G(s)H(s)= \frac{K}{(s+1)^2(s+2)}$ is shown in the figure. The value of $K$ is ___________ (up to $2$ decimal places).
The unit step response $y(t)$ of a unity feedback system with open loop transfer function $G(s)H(s)= \frac{K}{(s+1)^2(s+2)}$ is shown in the figure. The value of $K$ is _...
Page: