Register
Filter

Hot questions in new

0 votes
0 answers
401
GATE Electrical 2017 Set 1 | Question: 31
Let the signal $x(t)=\sum_{k=-\infty }^{+\infty } (-1)^{k} \delta (t-\frac{k}{2000})$ be passed through an LTI system with frequency response $H(\omega )$ ... $2000+2000\cos (2000 \pi t)+2000\cos (4000 \pi t)$ $4000\cos (2000 \pi t)$ $2000\cos (2000 \pi t)$
Let the signal$x(t)=\sum_{k=-\infty }^{+\infty } (-1)^{k} \delta (t-\frac{k}{2000})$be passed through an LTI system with frequency response $H(\omega )$, as given in the ...
0 votes
0 answers
408
GATE Electrical 2017 Set 2 | Question: 31
The output $y(t)$ of the following system is to be sampled, so as to reconstruct it from its samples uniquely. The required minimum sampling rate is $1000$ samples/s $1500$ samples/s $2000$ samples/s $3000$ samples/s
The output $y(t)$ of the following system is to be sampled, so as to reconstruct it from its samples uniquely. The required minimum sampling rate is$1000$ samples/s$1500$...
0 votes
0 answers
410
GATE Electrical 2017 Set 1 | Question: 37
The logical gate implemented using the circuit shown below where $V_{1}$ and $V_{2}$ are inputs (with $0$V as digital $0$ and $5$V as digital $1$) and $V_{out}$ is the output, is NOT NOR NAND XOR
The logical gate implemented using the circuit shown below where $V_{1}$ and $V_{2}$ are inputs (with $0$V as digital $0$ and $5$V as digital $1$) and $V_{out}$ is the ou...
0 votes
0 answers
412
GATE Electrical 2017 Set 2 | Question: 36
Which of the following systems has maximum peak overshoot due to a unit step input? $\frac{100}{s^{2}+10s+100} \\$ $\frac{100}{s^{2}+15s+100} \\ $ $\frac{100}{s^{2}+5s+100} \\$ $\frac{100}{s^{2}+20s+100}$
Which of the following systems has maximum peak overshoot due to a unit step input?$\frac{100}{s^{2}+10s+100} \\$$\frac{100}{s^{2}+15s+100} \\ $$\frac{100}{s^{2}+5s+100} ...
0 votes
0 answers
415
GATE Electrical 2017 Set 2 | Question: 48
In the circuit shown in the figure, the diode used is ideal. The input power factor is ________. (Give the answer up to two decimal places).
In the circuit shown in the figure, the diode used is ideal. The input power factor is ________. (Give the answer up to two decimal places).
0 votes
0 answers
416
GATE Electrical 2017 Set 2 | Question: 45
If the primary line voltage rating is $3.3$kV (Y side) of a $25$kVA, $Y-\Delta$ transformer (the per phase turns ratio is $5:1$), then the line current rating of the secondary side (in Ampere) is _______.
If the primary line voltage rating is $3.3$kV (Y side) of a $25$kVA, $Y-\Delta$ transformer (the per phase turns ratio is $5:1$), then the line current rating of the seco...
0 votes
0 answers
418
GATE Electrical 2017 Set 2 | Question: 46
Consider the system described by the following state space representation ... $y(t)$ at $t=1$ sec (rounded off to three decimal places) is ___________.
Consider the system described by the following state space representation$\begin{bmatrix}\dot{x}_{1}(t)\\\dot{x}_{2}(t)\end{bmatrix}=\begin{bmatrix}0 &1 \\0 & -2\end{bmat...
0 votes
0 answers
419
GATE Electrical 2017 Set 2 | Question: 22
The initial charge in the $1$ F capacitor present in the circuit shown is zero. The energy in joules transferred from the $DC$ source until steady state condition is reached equals _________. (Give the answer up to one decimal place.)
The initial charge in the $1$ F capacitor present in the circuit shown is zero. The energy in joules transferred from the $DC$ source until steady state condition is reac...
0 votes
0 answers
420
GATE Electrical 2017 Set 2 | Question: 43
A star-connected, $12.5$kW, $208$ V (line), $3$-phase, $60$ ... starting current (in Ampere) for this motor when connected to an $80$ V (line), $20$ Hz, $3$-phase AC source is _________.
A star-connected, $12.5$kW, $208$ V (line), $3$-phase, $60$Hz squirrel cage induction motor has following equivalent circuit parameters per phase referred to the stator: ...
0 votes
0 answers
422
GATE Electrical 2017 Set 2 | Question: 38
For the circuit shown below, assume that the $OPAMP$ is ideal. Which one of the following is TRUE? $v_{0}=v_{s}$ $v_{0}=1.5 v_{s}$ $v_{0}=2.5 v_{s}$ $v_{0}=5 v_{s}$
For the circuit shown below, assume that the $OPAMP$ is ideal.Which one of the following is TRUE?$v_{0}=v_{s}$$v_{0}=1.5 v_{s}$$v_{0}=2.5 v_{s}$$v_{0}=5 v_{s}$
0 votes
0 answers
429
GATE Electrical 2017 Set 1 | Question: 22
Consider the unity feedback control system shown. The value of $K$ that results in a phase margin of the system to be $30^{\circ}$ is _________. (Give the answer up to two decimal places.)
Consider the unity feedback control system shown. The value of $K$ that results in a phase margin of the system to be $30^{\circ}$ is _________. (Give the answer up to tw...
0 votes
0 answers
430
GATE Electrical 2017 Set 2 | Question: 6
When a unit ramp input is applied to the unity feedback system having closed loop transfer function $\frac{C(s)}{R(s)}=\frac{Ks+b}{s^{2}+as+b}, (a>0, b>0, K>0)$, the steady state error will be $0 \\ $ $\frac{a}{b} \\$ $\frac{a+K}{b} \\$ $\frac{a-K}{b}$
When a unit ramp input is applied to the unity feedback system having closed loop transfer function $\frac{C(s)}{R(s)}=\frac{Ks+b}{s^{2}+as+b}, (a>0, b>0, K>0)$, the stea...
0 votes
0 answers
432
GATE Electrical 2017 Set 2 | Question: 21
For the given $2$-port network, the value of transfer impedance $z_{21}$ in ohms is _________.
For the given $2$-port network, the value of transfer impedance $z_{21}$ in ohms is _________.
0 votes
0 answers
433
GATE Electrical 2017 Set 2 | Question: 30
In the circuit shown below, the value of capacitor $C$ required for maximum power to be transferred to the load is $1$ nF $1 \mu F$ $1$ mF $10$ mF
In the circuit shown below, the value of capacitor $C$ required for maximum power to be transferred to the load is $1$ nF$1 \mu F$$1$ mF$10$ mF
0 votes
0 answers
434
GATE Electrical 2017 Set 2 | Question: 42
A $120$ V DC shunt motor takes $2$A at no load. It takes $7$A on full load while running at $1200$ rpm. The armature resistance is $0.8 \Omega$, and the shunt field resistance is $240 \Omega$. The no load speed, in rpm, is _________.
A $120$ V DC shunt motor takes $2$A at no load. It takes $7$A on full load while running at $1200$ rpm. The armature resistance is $0.8 \Omega$, and the shunt field resis...
0 votes
0 answers
437
GATE Electrical 2017 Set 1 | Question: 41
The switch in the figure below was closed for a long time. It is opened at $t=0$. The current in the inductor of $2$H for $t \geq 0$, is $2.5e^{-4t}$ $5e^{-4t}$ $2.5e^{-0.25t}$ $5e^{-0.25t}$
The switch in the figure below was closed for a long time. It is opened at $t=0$. The current in the inductor of $2$H for $t \geq 0$, is $2.5e^{-4t}$$5e^{-4t}$$2.5e^{-0.2...
0 votes
0 answers
438
GATE Electrical 2017 Set 1 | Question: 18
The power supplied by the $25$V source in the figure shown below is __________ $W$.
The power supplied by the $25$V source in the figure shown below is __________ $W$.
0 votes
0 answers
439
GATE Electrical 2017 Set 1 | Question: 50
For a system having transfer function $G(s)=\frac{-s+1}{s+1}$, a unit step input is applied at time $t=0$. The value of the response of the system at $t=1.5 sec$ (rounded off to three decimal places) is ________.
For a system having transfer function $G(s)=\frac{-s+1}{s+1}$, a unit step input is applied at time $t=0$. The value of the response of the system at $t=1.5 sec$ (rounded...
0 votes
0 answers
440
GATE Electrical 2017 Set 2 | Question: 5
If a synchronous motor is running at a leading power factor, its excitation induced voltage $(E_{f})$ is Equal to terminal voltage $V_{t}$ Higher than the terminal voltage $V_{t}$ Less than terminal voltage $V_{t}$ Dependent upon supply voltage $V_{t}$
If a synchronous motor is running at a leading power factor, its excitation induced voltage $(E_{f})$ isEqual to terminal voltage $V_{t}$Higher than the terminal voltage ...
Page: